Woodluxe® Wood Brightener and Neutralizer

Use Woodluxe® Wood Brightener and Neutralizer to remove tannin bleed that is common with cedar and redwood or to remove rust stains from wood and concrete. It will also neutralize and brighten wood surfaces after using Woodluxe® Wood Restorer for gray & weathered wood (K016) or Woodluxe® Wood Stain Remover (K015), in addition to breaking the “mill glaze” on new wood. Product does not control mould, mildew, fungus or algae, only removes stains. 

• For restoring severely weathered wood
• Bleach-free formula is gentle to wood
• Concentrated formula

Application

Mixing Recommendations:
This container makes up to 9 cans of 3.78 L product. Mix ½ can of 3.78 L Woodluxe® Wood Brightener and Neutralizer with 3 ½ cans of 3.78 L water. For stubborn areas mix ½ can of 3.78 L Woodluxe® Wood Brightener and Neutralizer with 2 ½ cans of 3.78 L water. When using through a power washer chemical injector, place intake tube directly into
container.

DO NOT MIX CLEANER IN METAL CONTAINERS. NEVER MIX OR USE WITH OTHER CLEANERS OR CHEMICALS.

1) Apply product liberally to surface with plastic garden sprayer, brush or power washer chemical injector.
2) Allow solution to stand for 10 – 30 minutes, depending upon age and type of finish to be
removed.
3) Agitate with stiff bristle brush in direction of wood grain and rinse using a garden hose with nozzle or power washer.
4) Allow to dry thoroughly. Note: When applying to vertical surfaces, apply from bottom to top.